Lithofinder

Welcome to LITHOFIN

The Professional Solution for Cleaning, Protecting and Maintaining

MN for Natural and Artificial Stone

Lithofin MN Power-Clean

for thorough cleaning in case of severe general and greasy dirt, residues of floor care products, etc. For regular cleaning of high-traffic and outdoor areas such as shopping centres and food courts. For final cleaning of new surfaces at building sites. This product is recommended for all types of natural stone, but especially for polished marble and limestone.

  • concentrate
  • strong effect
  • free of acids, mildly alkaline
  • low on solvents and odour

Coverage: approx. 10 to 30 m2/L
Packaging: 1 L, 5 L
Stocking: closed, cool, up to 3 years

Technical Information
Material Safety Data Sheet

Lithofin MN Builders Clean

cleans granite, gneiss, quartzite and other natural and engineered stones. Removes cement films, stubborn dirt residues, blooms, efflorescence, rust and rust discolorations. Also acts to prevent rust in hard stones containing iron. Not suitable for polished marble, limestone etc.

  • concentrate
  • strong effect
  • acid based

Coverage: approx. 30 to 50 m2/L
Packaging: 1 L, 5 L
Stocking: closed, cool, up to 5 years

Technical Information Sheet
Material Safety Data Sheet

Lithofin MN Outdoor Cleaner

removes stubborn green and dark deposits as well as stains caused by trees or flowers from all natural and artificial stone surfaces. Flagstones, pavier, walls, paths, etc. are immediately restored to their original colour.

  • fast acting and highly effective

Coverage: up to 15 m²/L
Packaging: 1 L, 5 L
Stocking: closed, cool, dark, up to 6 months

Technical Information Sheet
Material Safety Data Sheet

Lithofin MN Stain-Stop

this special impregnator optimally protects absorbent, stain-sensitive natural and engineered stone surfaces against staining. Largely prevents penetration of oil, grease and water and makes further maintenance easier. Highly recommended in kitchen and bathroom. Poses no health concerns once dry.
Safe for areas where food is handled – this Lithofin product has been tested according to EU-Ordinance 1935/2004 by an independent institute. The product is considered safe for treating natural and artificial stone surfaces that come into direct contact with food stuffs.

  • no health concerns once dry
  • ready to use
  • for indoor and outdoor use
  • effective for many years

Coverage: approx. 7 to 15 m²/L
Packaging: 500ml, 1 L, 5 L
Stocking: closed, cool and dry, up to 3 years

Technical Information Sheet
Material Safety Data Sheet

Lithofin MN Stain-Stop >ECO<

this ready-to-use special impregnator is water based and nearly odourless. It has been developed specifically for highly absorbent limestone. The easy to apply treatment ensures the ultimate protection against water and oil stains and facilitates every-day maintenance.

  • ready to use
  • does not change the appearance
  • effective for many years

Coverage: approx. 4 to 8 m²/L
Packaging: 1 L, 5 L
Stocking: closed, cool, frost free, up to 3 years

Technical Information Sheet
Material Safety Data Sheet

Lithofin MN Colour Intensifier

improves the appearance of rough, absorbent natural and concrete stone surfaces. Enhances the colours, accentuates the structure, and makes water and dirt repellent.

  • ready to use
  • for indoor and outdoor use
  • no gloss
  • ideal for concrete slabs and pavers

Coverage: approx. 7 to 15 m2/L
Packaging: 1 L, 5 L
Stocking: closed, cool and dry, up to 4 years

Technical Information Sheet
Material Safety Data Sheet

Lithofin MN Colour Intensifier >W<

enhances the colour structure of rough, absorbent natural and concrete stones. Intensifies the colour structure and protects effectively against water borne staining.

  • ready to use
  • for indoor and outdoor use
  • no gloss
  • water based

Coverage: up to 20 m²/L
Packaging: 1 L, 5 L
Stocking: closed, cool, frost free, up to 2 years

Technical Information Sheet
Material Safety Data Sheet

Lithofin MN Slate-Seal

for rough and honed surfaces. Forms a shiny protective layer, strengthens the colour structure and simplifies maintenance.

  • ready to use
  • recommended for indoor use
  • contains solvents
  • can be applied in several coats

Coverage: approx. 10 to 20 m2/L
Packaging: 1 L, 5 L
Stocking: closed, cool and dry, up to 5 years

Technical Information Sheet
Material Safety Data Sheet

Lithofin MN Care-Seal

shiny protective film, which strengthens colour and gloss. For initial treatment of honed or rustic surfaces, and for occasional care of worn surfaces which have become dull.

  • concentrate
  • for indoor use only
  • water based

Coverage: approx. 20 m2/L (undiluted), up to 200 m2 diluted
Packaging: 1 L, 5 L
Stocking: closed, cool, frost free, up to 3 years

Technical Information Sheet
Material Safety Data Sheet

Lithofin MN Cobble Wax

for finishing treatment of antique marble floors with sandblasted or similarly processed surfaces. Also suitable for further care of waxed antique marble surfaces. Creates a hardwearing film and a richly coloured, shiny appearance. Makes the surface less sensitive and easier to maintain.

  • ready to use
  • easy to polish
  • for indoor use only
  • contains solvents

Coverage: approx. 20 m²/L
Packaging: 1 L, 5 L
Stocking: closed, cool and dry, up to 3 years

Technical Information Sheet
Material Safety Data Sheet

Lithofin MN Slate Oil

for protecting and maintaining all coloured and clay slates. Enhances natural colour and accentuates the structure, improving the appearance of the material. Ideal for restoring old surfaces.

  • easy and safe to use
  • high yield
  • water-repellent
  • for indoor use only

Coverage: approx. 20 m²/L
Packaging: 500ml, 1 L, 5 L
Stocking: closed, cool and dry, up to 3 years

Technical Information Sheet
Material Safety Data Sheet

Lithofin MN Polish (liquid)

for occasional freshening up and polishing of stone surfaces, provides gloss and protection. Maintains the beautiful appearance of all polished surfaces.

  • easy to polish
  • contains solvents
  • for indoor use only

Coverage: approx. 10 to 20 m2/L
Packaging: 1 L, 5 L
Stocking: closed, cool and dry, up to 3 years

Technical Information
Material Safety Data Sheet

Lithofin MN Polish

For enhancing and polishing stone surfaces, provides gloss and protection. Takes care of all polished surfaces, and maintains their beautiful appearance. No health concerns once dry (according to report FMPA).

  • easy to polish
  • low on solvents, water based

Coverage: approx. 40 m²/L
Packaging: 150ml, 500ml
Stocking: closed, cool and dry, up to 2 years

Technical Information Sheet
Material Safety Data Sheet

Lithofin MN Care-Sheen

for occasional restoration of sheen on polished marble and other stone floors. Forms a fine surface film and is the ideal additional care-product for all shiny floors. Also highly suitable to add sheen to unpolished, honed and matt finishes.

  • concentrate - very high yield
  • for indoor use only
  • contains wax

Coverage: approx. 20 m2/L (undiluted), up to 200 m2 diluted
Packaging: 1 L, 5 L
Stocking: closed, cool, frost free, up to 4 years

Technical Information Sheet
Material Safety Data Sheet

Lithofin MN Easy-Clean

for every-day cleaning of small stone surfaces such as kitchen bench-tops, tabletops, bathroom vanity tops and wall tiles. Enhances the appearance of the stone and leaves a pleasant odour.

  • cleans, protects and maintains
  • ready to use
  • does not leave streaks
  • no health concerns once dry

Coverage: approx. 20 m²/bottle
Packaging: 500ml
Stocking: closed, cool, up to 3 years

Technical Information
Material Safety Data Sheet

Lithofin MN Wash & Clean

developed for continuous care of all types of stone surfaces. Cleans, enhances, and maintains the surface in one action. Coarse and polished surfaces become increasingly beautiful and richer in colour and structure with regular use. Ideal for impregnated or sealed surfaces.

  • concentrate
  • does not form any layers
  • non-leaching

Coverage: approx. 20ml per 10 L of water
Packaging: 1 L, 5 L
Stocking: closed, cool, up to 5 years

technical information sheet
Material Safety Data Sheet

Lithofin MN Flagstone Sealant

forms a shiny protective layer that closes the pores of the stone. Water and dirt can no longer penetrate into the surface and maintenance is facilitated. The water permeability of the stone is reduced significantly. The colours of the stone become more vibrant through the "wet look" produced by Lithofin MN Flagstone Sealant.

  • intensifies colour and structure
  • ready to use
  • contains solvents
  • for indoor use only

Coverage: up to 10m² per litre
Packaging: 1 L, 5 L
Stocking: Closed, cool and dry. Do not store in temperatures above 25°C. Shelf life of approx. 4 years.

Technical Information Sheet
Material Safety Data Sheet